铜-金属有机框架物修饰电极的制备及甲硝唑测定

在玻碳电极表面聚合一层对氨基苯甲酸导电膜,通过羧基配位作用将具有优良导电性及催化能力的铜金属有机框架化合物(Cu-MOFs)自组装在对氨基苯甲酸修饰电极表面,制备了铜-金属有机框架物修饰电极。对Cu-MOFs进行了表征,研究了修饰电极的伏安特征及对甲硝唑(MNZ)的电催化特性,建立了一种高灵敏度的测定甲硝唑的电化学分析方法。在1.0~100.0μmol/L浓度范围内,MNZ的还原电流与其浓度呈良好的线性关系,检出限达0.23μmol/L,方法已用于蜂蜜样品中MNZ的测定。     

光谱法与共焦荧光成像法研究罗丹明B与ct-DNA的相互作用

采用吸收光谱、荧光光谱以及共焦荧光成像技术研究生理条件下罗丹明B(Rhodamine B,RB)与小牛胸腺DNA(ct-DNA)的相互作用以及相互作用模式。光谱研究结果显示,在450~650 nm的吸收光谱范围内,ct-DNA溶液对罗丹明B有减色作用;在560~660 nm荧光发射光谱范围内,ct-DNA对罗丹明B有荧光猝灭作用。同时,随着ct-DNA的加入,罗丹明B溶液的荧光偏振值发生变化,说明罗丹明B与ct-DNA能发生相互作用。在竞争性实验中,罗丹明B未能将亚甲基蓝(MB)从MB-ct-DNA复合体系中置换出来,说明罗丹明B与ct-DNA通过沟槽结合方式发生相互作用。共焦荧光成像结果显示,ct-DNA加入后,罗丹明B的荧光猝灭十分明显。利用罗丹明B和4',6-二脒基-2-苯基吲哚(DAPI)对He La细胞染色后进行共焦荧光成像,结果进一步证实罗丹明B与ct-DNA是通过沟槽结合作用将细胞核染成红色。     

超高效液相色谱-四极杆-飞行时间质谱法快速检测发酵黑茶中黄曲霉毒素B_1

以直接提取稀释结合黄曲霉毒素免疫亲和柱净化的方法,利用超高效液相色谱-四极杆-飞行时间质谱(UPLC-Q-TOF-MS),建立了发酵黑茶中黄曲霉毒素B1(AFB1)的快速分析方法。样品采用甲醇-水溶液(7∶3,体积比)提取,以HSS T3色谱柱(100 mm×2.1 mm,1.8μm)进行色谱分离,通过正离子扫描,Full ms-dd-MS/MS模式进行分析。结果表明:33种发酵黑茶中的AFB1在一定范围内具有良好的线性关系,相关系数(r2)大于0.999,4种样品的加标回收率(n=4)为86.4%~98.0%,相对标准偏差(RSD)为0.3%~1.7%,检出限(LOD,S/N≥3)和定量下限(LOQ,S/N≥10)分别为0.06μg/kg和0.19μg/kg。结果显示33种样品中的AFB1含量均在合理范围内。该方法准确、快速、简单,适用于发酵黑茶中AFB1的检测。     

DABCO-促进新型呋喃并[3,2-c]喹啉酮类化合物的合成

在1,4-二氮杂二环[2.2.2]辛烷(DABCO)促进下,以水为反应介质,通过3-溴乙酰基-4-羟基-1-甲基-2-喹啉酮与芳香醛的亲核取代、分子内环化及消除的串联反应,合成了9个新型的呋喃并[3,2-c]喹啉酮类化合物,其结构经~1H NMR,~(13)C NMR,IR,MS(ESI)和元素分析表征。     

微波消解-ICP-OES法测定哈氏C-276合金中Cr、Fe、Mo、W元素

建立了微波消解-电感耦合等离子体发射光谱法同时测定哈氏C-276合金中Cr、Fe、Mo、W元素含量的分析方法.采用10 m L HCl-HNO3-HF(体积比为10:1:1)混合酸溶解试样.研究了合金不同溶解方式、元素谱线的选择、背景校正等试验条件,并对仪器分析参数进行了优化,确定了最佳的试验条件,各元素分析谱线依次为Cr2 67.716 nm、Fe 238.204 nm、Mo 202.031 nm、W 209.712 nm,建立的校准曲线各元素相关系数均在0.999 5以上.实际样品分析中,加标回收率为97.8%~102.7%,重复测定结果的相对标准偏差小于1.64%(n=6),试验测定结果与镍基标准样品标准值做对照,结果表明方法准确、快速,能够满足日常生产的检测要求.     

电感耦合等离子体原子发射光谱法测定植物中钾、钠、钙和镁

采用硝酸–高氯酸湿法消解或硝酸–双氧水微波消解植物样品,以电感耦合等离子体原子发射光谱法同时测定样品溶液中钾、钠、钙和镁含量。用该法测定灌木枝叶和茶叶标准样品,测定值均在标准值范围内,测定结果的相对标准偏差为0.45%~4.05%(n=8)。钾、钠、钙、镁的加标回收率分别为94.4%~107.6%,92.6%~107.9%,93.7%~105.4%,92.9%~107.2%。该方法操作简便,测量精密度和准确度完全满足植物中钾、钠、钙和镁含量的测定要求。     

Solvent effect in polymer analysis by MALDI-TOF mass spectrometry

Solvent effect is one of the important factors in sample preparation which may affect matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectra of synthetic polymers. MALDI imaging, a useful imaging tool for discovering biomarkers in tissues, is applied here for better comprehension of solvent effect in polymer analysis by MALDI-TOF mass spectrometry. Nylon-6 was chosen as a model polymer for the study of solvent effect. Its MALDI mass spectra in different solvents were performed. MALDI imaging analysis was performed for studying the incorporation of analytes into matrix crystals in different solvent combinations. Specifically, the colocalization of matrix and analyte was obtained through Pearson’s correlation (PC) coefficient analysis of their MALDI images. The results demonstrated that satisfactory spectra were obtained in higher PC value conditions. PC decreased along with an increase in the ratio of poor solvent, which suggested that we should minimize the poor solvent ratio to obtain better MALDI spectra.     

Annealing behavior of ultrahigh molecular weight polyethylene investigated by confocal micro-Raman spectroscopy combined with two-dimensional correlation spectroscopy

Annealing was performed for ultrahigh molecular weight polyethylene (UHMWPE), including an isothermal process at 110.0°C and cooling process from 110.0 to 30.0°C. The processes were in situ investigated by confocal micro-Raman spectroscopy combined with two-dimensional correlation spectroscopy. Two phase transitions were directly observed in the annealing processes, i.e., from the amorphous phase to the intermediate phase and from the intermediate phase to the crystalline phase. The phase transitions derive from molecular chain segments sliding between different phases of UHMWPE and occur in different orders during the isothermal and cooling processes.     

A Portable Plasma Sterilizer

An atmospheric microplasma jet system powered by an commercial transformer is developed for investigating the sterilizing efficiency of Escherichia coli in different conditions. The device can be hand-held and operated in the open air. The effect of carrier gas, gas flow rate, distance and treatment time of inactivation is studied. According to the experiment, plasma jet is able to inactivate all the bacteria on the surface in 20 s when the air flow rate is 5 L/min and the distance is 2.0 cm. Besides, the sterilization efficacy with different carrier gas follows an order as bellow: N₂ > air > O₂ > Ar. The measurements of malondialdehyde content, protein leakage quantity and Mg content are performed as well. In addition, the SEM after plasma treatment reveals that the integrity of E. coli cells is damaged and intracellular particles are excreted into the extracellular space. With discussions upon the mechanisms of surface sterilization, it is found that during the treatment of microplasma, it is mainly the etching actions of electrons and ions on the bacilli that kill the E. coli. Chemical effects rather than physical ones that are responsible for inactivation. Furthermore, the experiment results suggest that there may be better sterilization effect with gas mixture as carrier gas.     

含酯基Gemini表面活性剂在有机醇-水体系中的胶束热力学及聚集行为

采用电导法研究了不同温度下含酯基Gemini表面活性剂在纯水和在质量分数为10%的甲醇-水(MAWR),乙二醇-水(EG-WR),丙三醇-水(GL-WR)四种体系中的集聚行为和胶束热力学;聚集行为参数包括临界胶束浓度(cmc)和抗衡离子的解离程度(α)以及胶束的热力学参数,包括标准吉布斯自由能(ΔG_m~o)、吉布斯迁移自由能(ΔG_(trans)~o)、吉布斯烷基链胶束化自由能(ΔG_(tail)~o)、标准焓变(ΔH_m~o)和标准熵变(ΔS_m~o),均被计算和讨论。研究表明在所有的研究体系中,cmc值随着疏水链的增加而减小,随着加入的醇结构中羟基数目的增加而增大,随温度的升高先变小,后变大呈U字形;胶束化过程都是自发进行的,并且在293.15 K下,胶束化过程是吸热的,在293.15 K上,胶束化过程是放热的;通过稳态荧光光谱法研究了表面活性剂在纯水、有机醇-水混合溶液中的微极性,结果表明,在相同溶剂中,随着烷基链长度的增加,溶液微环境的疏水性越强;对于相同的Gemini表面活性剂,随着加入含羟基数目越多的醇,其微环境的疏水性越强。并研究了Gemini表面活性剂在混合体系中形成胶束过程的焓-熵补偿曲线。